Загрузить файлы в «venv/Lib/site-packages/greenlet/platform»

venv/Lib/site-packages/greenlet/platform/switch_csky_gcc.h

@@ -0,0 +1,48 @@
+#ifdef SLP_EVAL
+#define STACK_MAGIC 0
+#define REG_FP "r8"
+#ifdef __CSKYABIV2__
+#define REGS_TO_SAVE_GENERAL "r4", "r5", "r6", "r7", "r9", "r10", "r11", "r15",\
+                             "r16", "r17", "r18", "r19", "r20", "r21", "r22",\
+                             "r23", "r24", "r25"
+
+#if defined (__CSKY_HARD_FLOAT__) || (__CSKY_VDSP__)
+#define REGS_TO_SAVE REGS_TO_SAVE_GENERAL, "vr8", "vr9", "vr10", "vr11", "vr12",\
+                                           "vr13", "vr14", "vr15"
+#else
+#define REGS_TO_SAVE REGS_TO_SAVE_GENERAL
+#endif
+#else
+#define REGS_TO_SAVE "r9", "r10", "r11", "r12", "r13", "r15"
+#endif
+
+
+static int
+#ifdef __GNUC__
+__attribute__((optimize("no-omit-frame-pointer")))
+#endif
+slp_switch(void)
+{
+        int *stackref, stsizediff;
+        int result;
+
+        __asm__ volatile ("" : : : REGS_TO_SAVE);
+        __asm__ ("mov %0, sp" : "=r" (stackref));
+        {
+                SLP_SAVE_STATE(stackref, stsizediff);
+                __asm__ volatile (
+                    "addu sp,%0\n"
+                    "addu "REG_FP",%0\n"
+                    :
+                    : "r" (stsizediff)
+                    );
+		
+                SLP_RESTORE_STATE();
+        }
+        __asm__ volatile ("movi %0, 0" : "=r" (result));
+        __asm__ volatile ("" : : : REGS_TO_SAVE);
+
+        return result;
+}
+
+#endif

venv/Lib/site-packages/greenlet/platform/switch_loongarch64_linux.h

@@ -0,0 +1,31 @@
+#define STACK_REFPLUS 1
+
+#ifdef SLP_EVAL
+#define STACK_MAGIC 0
+
+#define REGS_TO_SAVE "s0", "s1", "s2", "s3", "s4", "s5", \
+                    "s6", "s7", "s8", "fp", \
+                    "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31"
+
+static int
+slp_switch(void)
+{
+    int ret;
+    long *stackref, stsizediff;
+    __asm__ volatile ("" : : : REGS_TO_SAVE);
+    __asm__ volatile ("move %0, $sp" : "=r" (stackref) : );
+    {
+        SLP_SAVE_STATE(stackref, stsizediff);
+        __asm__ volatile (
+            "add.d $sp, $sp, %0\n\t"
+            : /* no outputs */
+            : "r" (stsizediff)
+        );
+        SLP_RESTORE_STATE();
+    }
+    __asm__ volatile ("" : : : REGS_TO_SAVE);
+    __asm__ volatile ("move %0, $zero" : "=r" (ret) : );
+    return ret;
+}
+
+#endif

venv/Lib/site-packages/greenlet/platform/switch_m68k_gcc.h

@@ -0,0 +1,38 @@
+/*
+ * this is the internal transfer function.
+ *
+ * HISTORY
+ * 2014-01-06  Andreas Schwab  <schwab@linux-m68k.org>
+ *      File created.
+ */
+
+#ifdef SLP_EVAL
+
+#define STACK_MAGIC 0
+
+#define REGS_TO_SAVE "%d2", "%d3", "%d4", "%d5", "%d6", "%d7", \
+		     "%a2", "%a3", "%a4"
+
+static int
+slp_switch(void)
+{
+  int err;
+  int *stackref, stsizediff;
+  void *fp, *a5;
+  __asm__ volatile ("" : : : REGS_TO_SAVE);
+  __asm__ volatile ("move.l %%fp, %0" : "=m"(fp));
+  __asm__ volatile ("move.l %%a5, %0" : "=m"(a5));
+  __asm__ ("move.l %%sp, %0" : "=r"(stackref));
+  {
+    SLP_SAVE_STATE(stackref, stsizediff);
+    __asm__ volatile ("add.l %0, %%sp; add.l %0, %%fp" : : "r"(stsizediff));
+    SLP_RESTORE_STATE();
+    __asm__ volatile ("clr.l %0" : "=g" (err));
+  }
+  __asm__ volatile ("move.l %0, %%a5" : : "m"(a5));
+  __asm__ volatile ("move.l %0, %%fp" : : "m"(fp));
+  __asm__ volatile ("" : : : REGS_TO_SAVE);
+  return err;
+}
+
+#endif

venv/Lib/site-packages/greenlet/platform/switch_mips_unix.h

@@ -0,0 +1,65 @@
+/*
+ * this is the internal transfer function.
+ *
+ * HISTORY
+ * 20-Sep-14 Matt Madison <madison@bliss-m.org>
+ *      Re-code the saving of the gp register for MIPS64.
+ * 05-Jan-08 Thiemo Seufer  <ths@debian.org>
+ *      Ported from ppc.
+ */
+
+#define STACK_REFPLUS 1
+
+#ifdef SLP_EVAL
+
+#define STACK_MAGIC 0
+
+#define REGS_TO_SAVE "$16", "$17", "$18", "$19", "$20", "$21", "$22", \
+       "$23", "$30"
+__attribute__((nomips16))
+static int
+slp_switch(void)
+{
+    int err;
+    int *stackref, stsizediff;
+#ifdef __mips64
+    uint64_t gpsave;
+#endif
+    __asm__ __volatile__ ("" : : : REGS_TO_SAVE);
+#ifdef __mips64
+    __asm__ __volatile__ ("sd $28,%0" : "=m" (gpsave) : : );
+#endif
+    __asm__ ("move %0, $29" : "=r" (stackref) : );
+    {
+        SLP_SAVE_STATE(stackref, stsizediff);
+        __asm__ __volatile__ (
+#ifdef __mips64
+            "daddu $29, $29, %0\n"
+#else
+            "addu $29, $29, %0\n"
+#endif
+            : /* no outputs */
+            : "r" (stsizediff)
+            );
+        SLP_RESTORE_STATE();
+    }
+#ifdef __mips64
+    __asm__ __volatile__ ("ld $28,%0" : : "m" (gpsave) : );
+#endif
+    __asm__ __volatile__ ("" : : : REGS_TO_SAVE);
+    __asm__ __volatile__ ("move %0, $0" : "=r" (err));
+    return err;
+}
+
+#endif
+
+/*
+ * further self-processing support
+ */
+
+/*
+ * if you want to add self-inspection tools, place them
+ * here. See the x86_msvc for the necessary defines.
+ * These features are highly experimental und not
+ * essential yet.
+ */

venv/Lib/site-packages/greenlet/platform/switch_ppc_aix.h

@@ -0,0 +1,87 @@
+/*
+ * this is the internal transfer function.
+ *
+ * HISTORY
+ * 07-Mar-11 Floris Bruynooghe <flub@devork.be>
+ *      Do not add stsizediff to general purpose
+ *      register (GPR) 30 as this is a non-volatile and
+ *      unused by the PowerOpen Environment, therefore
+ *      this was modifying a user register instead of the
+ *      frame pointer (which does not seem to exist).
+ * 07-Sep-05 (py-dev mailing list discussion)
+ *      removed 'r31' from the register-saved.  !!!! WARNING !!!!
+ *      It means that this file can no longer be compiled statically!
+ *      It is now only suitable as part of a dynamic library!
+ * 14-Jan-04  Bob Ippolito <bob@redivi.com>
+ *      added cr2-cr4 to the registers to be saved.
+ *      Open questions: Should we save FP registers?
+ *      What about vector registers?
+ *      Differences between darwin and unix?
+ * 24-Nov-02  Christian Tismer  <tismer@tismer.com>
+ *      needed to add another magic constant to insure
+ *      that f in slp_eval_frame(PyFrameObject *f)
+ *      STACK_REFPLUS will probably be 1 in most cases.
+ *      gets included into the saved stack area.
+ * 04-Oct-02  Gustavo Niemeyer <niemeyer@conectiva.com>
+ *      Ported from MacOS version.
+ * 17-Sep-02  Christian Tismer  <tismer@tismer.com>
+ *      after virtualizing stack save/restore, the
+ *      stack size shrunk a bit. Needed to introduce
+ *      an adjustment STACK_MAGIC per platform.
+ * 15-Sep-02  Gerd Woetzel       <gerd.woetzel@GMD.DE>
+ *      slightly changed framework for sparc
+ * 29-Jun-02  Christian Tismer  <tismer@tismer.com>
+ *      Added register 13-29, 31 saves. The same way as
+ *      Armin Rigo did for the x86_unix version.
+ *      This seems to be now fully functional!
+ * 04-Mar-02  Hye-Shik Chang  <perky@fallin.lv>
+ *      Ported from i386.
+ */
+
+#define STACK_REFPLUS 1
+
+#ifdef SLP_EVAL
+
+#define STACK_MAGIC 3
+
+/* !!!!WARNING!!!! need to add "r31" in the next line if this header file
+ * is meant to be compiled non-dynamically!
+ */
+#define REGS_TO_SAVE "r13", "r14", "r15", "r16", "r17", "r18", "r19", "r20", \
+       "r21", "r22", "r23", "r24", "r25", "r26", "r27", "r28", "r29", \
+       "cr2", "cr3", "cr4"
+static int
+slp_switch(void)
+{
+    int err;
+    int *stackref, stsizediff;
+    __asm__ volatile ("" : : : REGS_TO_SAVE);
+    __asm__ ("mr %0, 1" : "=r" (stackref) : );
+    {
+        SLP_SAVE_STATE(stackref, stsizediff);
+        __asm__ volatile (
+            "mr 11, %0\n"
+            "add 1, 1, 11\n"
+            : /* no outputs */
+            : "r" (stsizediff)
+            : "11"
+            );
+        SLP_RESTORE_STATE();
+    }
+    __asm__ volatile ("" : : : REGS_TO_SAVE);
+    __asm__ volatile ("li %0, 0" : "=r" (err));
+    return err;
+}
+
+#endif
+
+/*
+ * further self-processing support
+ */
+
+/*
+ * if you want to add self-inspection tools, place them
+ * here. See the x86_msvc for the necessary defines.
+ * These features are highly experimental und not
+ * essential yet.
+ */